This is the second of three posts showing a carving I made of an old-time clock peddler. (Part 1, Part 3) Here you will see many photos taken of the project as it evolved into a finished carving. I also show a picture of my tools and my carving bench. the project is mounted on a carving arm and held in place with a carving screw. My carving tools are designed for use with a mallet but only the very early stages required the mallet to remove larger amounts of wood. The remainder of the cuts were done by simply pushing the tools. You will also see a measuring device used to transfer dimensions from the model to the project. The first picture shows my mallet, a carving screw, two dividers, a carving arm and a plastic scale.